Create Service Instance To Machine Mapping
The Create Service Instance To Machine Mapping wizard supports you in mapping Service Instances to Communication Connectors of a Machine.
Open Wizard
To open the Create Service Instance To Machine Mapping wizard, expand
your DaVinci Adaptive project in the
DaVinci Project Explorer and double
click on
Open Project Dashboard. The Project Frame
opens showing the Project Home. You can then
open the Create Service Instance To Machine Mapping wizard as follows:
-
Open the
Wizard menu on the top right of the Project
Frame and click the
Service Instance To Machine Mapping Wizard command. -
Alternatively, use the context menu command
Create|
Create Service Instance To Machine Mapping… of an AUTOSAR Package,
Provided SOME/IP Service Instance, or Required SOME/IP Service Instance
in the 
AUTOSAR Model Explorer.
The Create Service Instance To Machine Mapping wizard opens.
Step-by-Step Procedure
To create a new mapping, open the Create Service Instance To Machine Mapping wizard and proceed as follows:
-
Select a Service Instance Page
On the Select a Service Instance page, all available Service Instances are listed.
To show all existing Service Instances, deactivate the check box Show only unmapped Service Instances.
Activate the check box of the SOME/IP Service Instance to be mapped to a Machine.
Click Next > to confirm your selection.
-
Select a Communication Connector Page
On this page, an Ethernet Communicator Connector for the service communication is selected.
Activate the check box of the Communication Connector to be used.
Click Next > to confirm your selection.
-
General Settings Page
On this page, the general settings are defined.
Enter the Name, Package, and ARXML File of the Service Instance To Machine Mapping to be created.
Depending on the used protocol of the Service Instance, enter the TCP Port and/or UDP Port to be used.
Click Finish to close the wizard.
The Service Instance To Machine Mapping has been created.